Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- de:expansion:cpu:cyberstorm_ppc [2013/09/03 06:04] – Bilder dazu MWanke
+++ de:expansion:cpu:cyberstorm_ppc [2024/09/22 00:25] (aktuell) – Externe Bearbeitung 127.0.0.1
@@ Zeile 23: / Zeile 23: @@
 |A4000|x.x|
 \\
+==== Kondensatoren der Cyberstorm PPC ====
+^ Anz.  ^  µF    ^  V   ^Rastermaß^ Ø in mm ^ Höhe in mm ^Reichelt^
+|  **6**  | 1000µF  | 10V  | RM5 | 10 | 24 | RAD FC 1.000/10 |
 ===== Jumperbelegung =====
 ==== 1. ====
-  * rechtsoben neben dem MACH-Chip:\\ [{{:de:expansion:cpu:cyberstormppc_jumper_pic.jpg?150|Jumper}}]\\
+  * rechtsoben neben dem MACH-Chip:\\ [{{:de:expansion:cpu:cyberstormppc_jumper_pic.jpg?150  |Jumper}}]
-\\
+was ich bisher gefunden habe (Jumper von oben nach unten: 1 bis 6)
+[quote]Note that I obtained these results from experimentation, so I can't promise total accuracy. The jumper positions shown are for a standard 200MHz PPC, 50MHz 060 board. A clearer idea of their location can be found in the picture below, in the "How to overclock" section.
+  * 1: Unknown - this jumper has no apparent effect.
+  * 2: Unknown - this jumper has no apparent effect.
+  * 3: Swaps PPC clock source from oscillator 1 (default) to oscillator 3 (alternative).
+  * 4: Moves PPC clock source from oscillator 1 (default), adding to oscillator 2 (alternative), making it possible to clock both CPUs from oscillator 2.
+  * 5: 68K processor select, 68060 (default), 68040 (alternative). See below for more details.
+  * 6: 68K clock source, Oscillator 2 (default), oscillator 3 (alternative). System devices continue to be clocked from oscillator 2 when alternative is selected.[/quote]
 ==== 2. ====
@@ Zeile 47: / Zeile 62: @@
   * Software-Updates
     * http://phase5.a1k.org/index.php?driverslibraries
+{{tag>PPC}}

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Unterschiede

Seiten-Werkzeuge