Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- de:software:other:laserdisc [2013/02/24 07:27] – Externe Bearbeitung 127.0.0.1
+++ de:software:other:laserdisc [2024/09/22 00:27] (aktuell) – Externe Bearbeitung 127.0.0.1
@@ Zeile 33: / Zeile 33: @@
 Here's how it is done:
-Amiga end -> 25 pin male centronics connector
+Amiga end -> 25 pin male centronics connector\\
-LDP end -> male mono jack
+LDP end -> male mono jack\\
+\\
 The cable is a standard mono audio cable (signal and shield ground).
 Signal goes from Amiga parallel port pin 3 to the LDP input via a 1 kohm resistor.
-Signal ground is taken from Amiga parallel port pin 25.
+Signal ground is taken from Amiga parallel port pin 25.\\
+\\
-If the Amiga computer and the laserdisc player are not connected to the same monitor or TV (for example Amiga has its own monitor and LDP is connected to a TV), it is possible that the system does not work. To fix this an additional ground connection between Amiga and LDP is needed: it can be implemented by connecting 1 wire from LDP ground (example any ground from RCA audio/video output connector of the LDP) and any Amiga port ground (for example composite video ground RCA output).
+If the Amiga computer and the laserdisc player are not connected to the same monitor or TV (for example Amiga has its own monitor and LDP is connected to a TV), it is possible that the system does not work. To fix this an additional ground connection between Amiga and LDP is needed: it can be implemented by connecting 1 wire from LDP ground (example any ground from RCA audio/video output connector of the LDP) and any Amiga port ground (for example composite video ground RCA output).\\
+\\
-The LDG control software will only work on slower Amigas, i.e. A500 and A600. Other newer and faster models will not work.
+The LDG control software will only work on slower Amigas, i.e. A500 and A600. Other newer and faster models will not work.\\
+\\
 Software Corner later released a infrared remote interface, mainly for PC versions of the control software. This is a totally different interface and plugs into the serial port instead of parallel (as far as I know). This interface was slightly more complex and required and external power supply. It basically consisted in a remote infrared control for the Pioneer laserdisc player controlled by the computer program.//
@@ Zeile 50: / Zeile 50: @@
 ===== 4. Steuersoftware =====
 Es wird eine Steuersoftware benötigt, diese kann [[http://www.dragonslairfans.com/emulatethelair/emulate.htm|hier]] heruntergeladen werden (ganz unten).
+Control Discs von Gerald Müller-Bruhnke:
+{{:de:software:other:dl_control_fr.zip|1.}}
+{{:de:software:other:dl_control_ger.zip|2.}}
+{{:de:software:other:dl_control_it.zip|3.}}

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Unterschiede

Seiten-Werkzeuge